Views: 0 Author: Site Editor Publish Time: 2023-12-16 Origin: Site
Integrated Vibration Speed Transmitter S31GT20A
1、Product Overview
Model S31 Integrated Vibration Velocity Transmitter is a specialized high precision design based on an acceleration sensor with a precision integration circuit embedded inside. Features: Piezoelectric crystal as the sensitive element, no internal moving parts, no degradation and wear. Mechanical moving parts are not easy to damage, strong anti-interference ability, wide frequency response range, excellent dynamic characteristics, stainless steel housing, laser welding sealing, double shielding isolation, waterproof, dustproof, anti-oil, range can be customized. Application: Measurement of bearing box, shell or structure of the absolute (relative to the free surface) vibration suitable for industrial sites in a variety of high-temperature environment.
2、Features
-Embedded precision integration circuit, true RMS 4-20mA output
-Used for equipment failure absolute vibration speed measurement
-Isolated floating, industrial field monitoring, strong anti-interference performance
-Measurement of equipment surface temperature can be as high as 250 ℃.
3、Product Technical Indicators
| Main technical indicators | |
| Dynamic property | |
| Measuring range (RMS) | 0-20mm/sec（selectable） |
| Output | 4-20mA(true rms) |
| Amplitude non-linearity | <2% |
| Frequency response(±1dB) | 10-1,000Hz |
| Frequency response(±3dB) | 5-1,000Hz |
| Transverse sensitivity | ≤5% |
| Electrical Performance | |
| Supply voltage | 15~30VDC |
| Mounting insulation to ground | ≥108Ω |
| Environmental Characterization | |
| Operating temperature | -40~+250℃（Surface temperature） |
| Shock limit (peak) | 1000g |
| Physical property | |
| Structure and piezo material | Shear/PZT-5 |
| Housing material | 304 stainless steel |
| Electrical connector | MIL-C-5015 2-PIN socket |
| Mounting method | 1/4-28 |
| Protection class | IP65 |
| Weight | ~200g |
| Annex | |
| Mounting bolts | 1/4-28 to M6 |
| Connection cable | DJ03-3M |
4、Dimension drawing
5、Temperature Curve
6、Typical Impact Curve
7、Installation Notes
1）Mounting method
When choosing the installation of the sensor should carefully consider the different mounting methods may have an impact on the amplitude and frequency of the sensor. Sensors can be mounted in a variety of ways: hand-held probe, adhesive, magnetic mounting, threaded mounting and so on. Different mounting methods produce different mounting stiffness, resulting in changes in the sensor's measurement frequency, the higher the stiffness, the wider the measurement frequency. Therefore, when mounting the sensor it is best to bolt the sensor directly to the object to be measured.
2）Installation surface
The bottom surface of the sensor has a smoothness of <10μm, and it is also hoped that the user will polish the surface of the object to be measured to improve the smoothness and flatness, so that the roughness of the mounting surface of the object to be measured is less than 10μm. Clean the bottom surface of the sensor and the mounting surface to ensure that the surface is free of foreign matter.
3）Bolt connection method
Bolt connection is the most reliable installation method, first of all, in the clean and flat mounting surface to drill a mounting threaded hole (hole depth should be longer than the bolt). Secondly, in order to ensure effective contact between the upper and lower end surfaces, it is best to apply a layer of grease on the bonding surface to increase the contact stiffness, which ensures that the entire bottom surface of the sensor can be well rigid contact with the object to be measured. Finally, use a torque wrench to install the sensor on the mounting surface, the mounting screw holes must be perpendicular to the surface, and the mounting torque is 2.5 to 5NM.
8、Scope of Use
Yangzhou Xiyuan Electronic Technology Co.,Ltd.
Building 2,217 kaifa west road,high-tech development zone, yangzhou, jiangsu,China 225128
Mobie Phone: +86 180-5105-8377
Tel: +86 514-82885589
Whatsapp:+86 182-6066-6867
Email: sale1@yzxyt.com
Fax: +86 514-82885089
