 |
A271F10
Xiyuan
Miniature Tri-axial Piezoelectric accelerometer sensor in IEPE type
This series of micro accelerometer sensors is equipped with an accelerometer that converts high impedance charge signals into low impedance voltage signals, and uses coaxial cables to simultaneously perform constant current source excitation input and signal output.
1/4-28 four core socket output, capable of simultaneously measuring acceleration signals in the X, Y, and Z axes. It has a wide frequency response, small size, and light weight, making it suitable for vibration testing occasions such as modal analysis, motors and pumps, and precision machining.
| Features | Unit | A271F10 | A271F20 | A27F05 | A27F10 | A27F20 | A27F50 | A27F100 |
| Measuring range (peak) | g | ±500 | ±250 | ±1000 | ±500 | ±250 | ±100 | ±50 |
| Sensitivity (25°C) | mV/g(Hz) | 10 | 20 | 5 | 10 | 20 | 50 | 100 |
| Frequency response (1dB) | Hz | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 0.5-5,000 |
| Mounting resonance frequency | Hz | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 |
| Transverse sensitivity | % | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
| Excitation voltage | VDC (Constant current source) | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 |
| Constant current source excitation | mA | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 |
| Output impedance | Ω | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 |
| Full scale output (peak) | V | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 |
| Noise (rms) | μV | <50 | <50 | <50 | <50 | <50 | <50 | <50 |
| Bias Voltage | V | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 |
| Operating temperature | ℃ | -40 ~+120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 |
| Shock limit (peak) | g | ±2000 | ±2000 | ±2000 | ±2000 | ±2000 | ±1000 | ±1000 |
| Structure and piezo material | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | |
| Outline dimension | mm | 10.5m³(See external dimensions Fig. 1) | 10.5m³(See externl dimensions Fig. 1) | 12.5m³(See external dimensions Fig. 2) | 12.5m³(See external dimensions Fig. 2) | 12.5m³(See external dimensions Fig. 2) | 14m³(See external dimensions Fig. 3) | 14m³(See external dimensions Fig. 3) |
| Housing material | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | |
| Electrical connector | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | |
| Mounting method | Gum | Gum | Gum | Gum | Gum | Gum | Gum | |
| Weight | g | ~8.5 | ~8.5 | ~12 | ~12 | ~12 | ~18 | ~18 |
| Mounting bolts | / | / | M3 to M5 | M3 to M5 | M3 to M5 | M5 | M5 | |
| Cable | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M |
Miniature Tri-axial Piezoelectric accelerometer sensor in IEPE type
This series of micro accelerometer sensors is equipped with an accelerometer that converts high impedance charge signals into low impedance voltage signals, and uses coaxial cables to simultaneously perform constant current source excitation input and signal output.
1/4-28 four core socket output, capable of simultaneously measuring acceleration signals in the X, Y, and Z axes. It has a wide frequency response, small size, and light weight, making it suitable for vibration testing occasions such as modal analysis, motors and pumps, and precision machining.
| Features | Unit | A271F10 | A271F20 | A27F05 | A27F10 | A27F20 | A27F50 | A27F100 |
| Measuring range (peak) | g | ±500 | ±250 | ±1000 | ±500 | ±250 | ±100 | ±50 |
| Sensitivity (25°C) | mV/g(Hz) | 10 | 20 | 5 | 10 | 20 | 50 | 100 |
| Frequency response (1dB) | Hz | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 1-5,000 | 0.5-5,000 |
| Mounting resonance frequency | Hz | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 | ≥15,000 |
| Transverse sensitivity | % | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
| Excitation voltage | VDC (Constant current source) | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 | 18~28 |
| Constant current source excitation | mA | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 |
| Output impedance | Ω | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 | ＜100 |
| Full scale output (peak) | V | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 |
| Noise (rms) | μV | <50 | <50 | <50 | <50 | <50 | <50 | <50 |
| Bias Voltage | V | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 |
| Operating temperature | ℃ | -40 ~+120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 | -40~ +120 |
| Shock limit (peak) | g | ±2000 | ±2000 | ±2000 | ±2000 | ±2000 | ±1000 | ±1000 |
| Structure and piezo material | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | Shear/ PZT-5 | |
| Outline dimension | mm | 10.5m³(See external dimensions Fig. 1) | 10.5m³(See externl dimensions Fig. 1) | 12.5m³(See external dimensions Fig. 2) | 12.5m³(See external dimensions Fig. 2) | 12.5m³(See external dimensions Fig. 2) | 14m³(See external dimensions Fig. 3) | 14m³(See external dimensions Fig. 3) |
| Housing material | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel | |
| Electrical connector | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | 1/4-28 4-Pin socket | |
| Mounting method | Gum | Gum | Gum | Gum | Gum | Gum | Gum | |
| Weight | g | ~8.5 | ~8.5 | ~12 | ~12 | ~12 | ~18 | ~18 |
| Mounting bolts | / | / | M3 to M5 | M3 to M5 | M3 to M5 | M5 | M5 | |
| Cable | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M | D04-5M |
