Publish Time: 2024-03-22 Origin: Site
500°C Ultra High Temperature Charge Output Acceleration Sensor
Xiyuan Electronics has launched a new vibration sensor for high temperature testing, model AC18GTC08, which features high temperature piezoelectric ceramics, nickel-based alloy housing, and an operating temperature of up to 500°C, with a temperature drift of less than 10% over the full temperature range. This new sensor is ideal for engine combustion testing at high temperatures, as well as for measurements on aero-engines, nuclear reactors, and high-temperature combustion turbines.
Product Features
-Designed for high temperature test environments
Maximum operating temperature up to 500℃, ultra-low sensitivity temperature coefficient.
-Special high-temperature resistant metal housing, special high-temperature resistant piezoelectric materials
-Low temperature drift
-Special output connector form, less interference
-Optional high temperature metal cable
Product Technical Indicators
Main technical indicators | ||
Characteristics | Unit | |
(level of) sensitivity | pC/g | 10 |
Measurement range | g | ±800 |
Frequency Response ± 5% | Hz | 10-5k |
±10% | Hz | 1-6k |
Amplitude linearity | % | ≤1 |
Transverse Sensitivity | % | ≤5 |
Installation resonance frequency | KHz | ≥25 |
Environment | ||
Base Strain | g/ε | 0.0008 |
Shock Limit | gpk | 1500 |
Maximum vibration | grms | 1000 |
Sensitivity Temperature Coefficient | %/℃ | 0.02 |
Operating Temperature | ℃ | |
Sealing form | IP68 | laser brazing |
Electrical parameters | ||
Core Capacitance | pF | 550 |
Core Insulation Resistance | 25℃Ω | ≥1*10^9 |
Core Insulation Resistance | 500℃Ω | ≥1*10^7 |
Framework | ||
Sensitive elements | High temperature piezoelectric ceramics | |
Housing material | Nickel-based alloys | |
Sealing form | Laser welded IP68 | |
Output connector | 10-32 Side End | |
Mounting thread | M5 | |
Insulation to ground | Ω | ≥1*10^8 |
Quality | g | 30 |
Recommended Mounting Torque | N.m | 3 |
Size Chart
Loudness Curve
Instructions for use
1. Installation requirements: The sensor mounting contact surfaces should be kept as flat and clean as possible and cleaned if necessary. To ensure a better rigid connection, try to use screw mounting.
2. Measuring direction: the sensor mounting surface pointing to the connector direction is positive.
3. The standard configuration of the cable is a high temperature resistant metal cable with an operating temperature of -50~500℃.
4. This model is an acceleration sensor for vibration measurement, it can measure very small value shock signal (about 1/5 range, the specific size is related to the pulse width), and cannot measure large signal shock.
Scenarios of use
Yangzhou Xiyuan Electronic Technology Co.,Ltd.
Building 2,217 kaifa west road,high-tech development zone, yangzhou, jiangsu,China 225128
Mobie Phone: +86 180-5105-8377
Tel: +86 514-82885589
Whatsapp:+86 182-6066-6867
Email: sale1@yzxyt.com
Fax: +86 514-82885089