 |
A21C50
Xiyuan
cheap price iepe high accuracy industrial monitoring piezoelectric shock accelerometer sensor
The A21C type side output accelerometer is an accelerometer with a built-in circuit that converts high impedance charge signals into low impedance voltage signals. It uses coaxial cables to simultaneously perform constant current source excitation input and signal output. Widely used in vibration control, drop testing, environmental testing, structural testing, product quality research, mechanical research, modal testing, and other vibration and impact dynamic testing fields.
| Characterization | Unit | A21C 01 | A21C 05 | A21C 10 | A21C 20 | A21C 50 | A21C 100 | A21C 200 | A21C 500 | A21C1000 |
| Measurement Range (peak) | g | ±5000 | ±1000 | ±500 | ±250 | ±100 | ±50 | ±25 | ±10 | ±5 |
| Sensitivity (25°C)±5% | mV/g | 1 | 5 | 10 | 20 | 50 | 100 | 200 | 500 | 1000 |
| Frequency range（土1dB） | Hz | 1-12K | 1-12K | 1-10K | 1-10K | 0.5-8K | 0.5-8K | 0.5-5K | 0.5-3K | 0.2-2,000 |
| Resonant Frequency | Hz | ≥45K | ≥45K | ≥40K | ≥40K | ≥30K | ≥30K | ≥15K | ≥10K | ≥6K |
| Transverse Sensitivity | % | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
| Excitation Voltage | VDC (constant current source) | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 |
| Constant Current Excitation(mA) | mA | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 |
| Output Impedance | Ω | <100 | <100 | <100 | <100 | <100 | <100 | <100 | <100 | <100 |
| Full scale output (peak) | V | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 |
| Noise | µV | <50 | <50 | <50 | <50 | <50 | <50 | <80 | <80 | <80 |
| Bias Voltage | V | +9 ~+13 | +9~ +13 | +9~ +13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 |
| Operating temperature | ℃ | -40 ~+120 | -40~ +120 | -40~ +120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 |
| Measurement Range (peak) | g | ±6000 | ±5000 | ±3000 | ±3000 | ±3000 | ±3000 | ±1000 | ±1000 | ±500 |
| Forms of construction and piezoelectric materials | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | |
| Overall Dimension | mm | φ12* 15 | φ12* 15 | φ12* 15 | φ12* 15 | φ12* 17 | φ12* 17 | φ18* 26 | φ18* 26 | φ26*26.5 |
| Housing Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | |
| Electrical Connector | lateral end -M5 | lateral end -M5 | lateral end -M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateal end-M5 | |
| Mounting method | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | |
| Weight | g | ~9.5 | ~9.5 | ~9.5 | ~9.5 | ~13 | ~13 | ~46 | ~46 | ~110 |
| Mounting Thread | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | |
| Cable | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M |
cheap price iepe high accuracy industrial monitoring piezoelectric shock accelerometer sensor
The A21C type side output accelerometer is an accelerometer with a built-in circuit that converts high impedance charge signals into low impedance voltage signals. It uses coaxial cables to simultaneously perform constant current source excitation input and signal output. Widely used in vibration control, drop testing, environmental testing, structural testing, product quality research, mechanical research, modal testing, and other vibration and impact dynamic testing fields.
| Characterization | Unit | A21C 01 | A21C 05 | A21C 10 | A21C 20 | A21C 50 | A21C 100 | A21C 200 | A21C 500 | A21C1000 |
| Measurement Range (peak) | g | ±5000 | ±1000 | ±500 | ±250 | ±100 | ±50 | ±25 | ±10 | ±5 |
| Sensitivity (25°C)±5% | mV/g | 1 | 5 | 10 | 20 | 50 | 100 | 200 | 500 | 1000 |
| Frequency range（土1dB） | Hz | 1-12K | 1-12K | 1-10K | 1-10K | 0.5-8K | 0.5-8K | 0.5-5K | 0.5-3K | 0.2-2,000 |
| Resonant Frequency | Hz | ≥45K | ≥45K | ≥40K | ≥40K | ≥30K | ≥30K | ≥15K | ≥10K | ≥6K |
| Transverse Sensitivity | % | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
| Excitation Voltage | VDC (constant current source) | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 | 18-28 |
| Constant Current Excitation(mA) | mA | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 |
| Output Impedance | Ω | <100 | <100 | <100 | <100 | <100 | <100 | <100 | <100 | <100 |
| Full scale output (peak) | V | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 | ±5 |
| Noise | µV | <50 | <50 | <50 | <50 | <50 | <50 | <80 | <80 | <80 |
| Bias Voltage | V | +9 ~+13 | +9~ +13 | +9~ +13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 | +9~+13 |
| Operating temperature | ℃ | -40 ~+120 | -40~ +120 | -40~ +120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 | -40~+120 |
| Measurement Range (peak) | g | ±6000 | ±5000 | ±3000 | ±3000 | ±3000 | ±3000 | ±1000 | ±1000 | ±500 |
| Forms of construction and piezoelectric materials | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | Shear/PZT-5 | |
| Overall Dimension | mm | φ12* 15 | φ12* 15 | φ12* 15 | φ12* 15 | φ12* 17 | φ12* 17 | φ18* 26 | φ18* 26 | φ26*26.5 |
| Housing Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | |
| Electrical Connector | lateral end -M5 | lateral end -M5 | lateral end -M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateral end-M5 | lateal end-M5 | |
| Mounting method | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | |
| Weight | g | ~9.5 | ~9.5 | ~9.5 | ~9.5 | ~13 | ~13 | ~46 | ~46 | ~110 |
| Mounting Thread | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | |
| Cable | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M | D02-2M |
